multiprocess in the same layout

hy all

i am facing a problem in multi-process in the same layout.

the problem is regarding the movement of operator in the layout, the 2 process are as follows:

1st process flow:
m1-->q7-->q8-->m2-->q9-->q8-->m3->q9->q15

2nd process flow:
m1->q7->q8->m2->q9->q10

second process starts after let say 800sec on run time.

the operator11 does two works on machine m2 and m3 in 1st process and only 1 machine m2 in 2nd process.

i am unable to understand how to build a logic for it, can please someone help me out to solve this issue.

i have attached a model of it please look at it.

Hi? sravan
I think the key of the logic you want to build is that q8 will receive item twice in 1st process and it has different downstream to send.
In my attached model, I add a label in item to differentiate if it was the first time to get into q8, and let this item go to the right downstream.
Also I add an "A" connetction form q9 to q8 and changed the sendtoport trigger in q9.
Without using m3 in 2nd process, So we don't need to make any change about operator11.

hi jing chen

thanks for the post. but the model you attested is not found. when i tried to open it,
it always prompts model is not found.

please re-post the model. so that i can understand the key behind it.

thank you.

Originally Posted by sravan kumar

hi jing chen

thanks for the post. but the model you attested is not found. when i tried to open it,
it always prompts model is not found.

please re-post the model. so that i can understand the key behind it.

thank you.

I can download it normally, I don't know what is wrong. Maybe You can try later.

hy jing chen

thanks for the model sir it helped me. but the model that you have sent was not that has i expected.

sorry for not narrating the problem correctly in 1st process. the problem in the current model is operator 14 should move from q9 to q15 and q10 in both the processes, but not from q9 to q8. rest of the model is working good.

the process as follows
1st process:
the operator 11 should carry product from q8 to m2 and after machining he should drop the product in q9 and now after he will pick another product from q8 and carry it to m3 and after machining he should drop it in q9 this is 1st process.

2nd process let's say after 650sec
the operator 11 should carry product from q8 to m2 and after machining he should drop it in q9 and again the same process will be repeated, but he should not use machine (m3) in the 2nd process.

when i tried to re-correct the model, this time it is not using machine (m3) for both the process.

please provide the logic for it.

i have attached the model please look into it sir.

thank you

HI ! sravan
My English is not good enough to fully understand what you want to do. While according to your description, I guess in 1st process you may want to pick an item from q8 to m2 and pick another item to m3 and that cycle repeats.
Here is the model I understand, and hope it will help you.