ATTENTIONThis FlexSim Community Forum is read-only. Please post any new questions, ideas, or discussions to our new community (we call it Answers) at https://answers.flexsim.com/. Our new Question & Answer site brings a modern, mobile-friendly interface and more focus on getting answers quickly. There are a few differences between how our new Q&A community works vs. a classic, threaded-conversation-style forum like the one below, so be sure to read our Answers Best Practices. |
flexsim.com |
#1
|
||||
|
||||
FlexSim 7.3.0 Available
FlexSim 7.3.0 is available. You can download it from the account section of the website.
If you have feature requests, bug reports, or other feedback on the software, please email [email protected] or use the support page at www.flexsim.com/support ================================================== Release Notes --- FlexSim 7.3.0 -----------------------------------
*** Backwards Compatibility Note *********************************************** *** the following changes may slightly change the way updated models behave ****
|
The Following 6 Users Say Thank You to Phil BoBo For This Useful Post: | ||
syseo (08-04-2014) |
#2
|
||||
|
||||
The existing AGV and AStar module are not supported in new 7.3.0 version?
I have installed the new 7.3.0 flexsim.
The existing latest A Star (v.1.1.2) and AGV module(v.1.0.6) can't be supported in the new flexsim? Should those be upgraded for the new released flexsim? Thanks. |
#3
|
||||
|
||||
Is it impossible to analyze the raw data distribution or data fitting?
I found ExperFit removed in new 7.3.0 flexsim.
Is it also impossible to make the raw data analyzed in new one? ExperFit has the good feature of raw data analysis in simple. Can't we use any more the input data analysis tool in 7.3.0? |
#4
|
||||
|
||||
If you have questions regarding the removal of ExpertFit, contact support using the webpage at www.flexsim.com/support
|
#5
|
||||
|
||||
You can now download and install the latest AStar (1.1.4) and AGV (1.0.8) modules that will work with FlexSim 7.3 from the FlexSim Online Content page.
|
The Following 4 Users Say Thank You to Phil BoBo For This Useful Post: | ||
syseo (08-06-2014) |
#6
|
|||
|
|||
Version 7.3
Congratulations for the new features on 7.3 version, but remove ExperFit is one step beyhind comparing with our competitors (commercialy talking). Our opinion is that FlexSim should have something like ExpertFit or StatFit.
The instalation of version of 7.3 was done perfectly.
__________________
Michael Machado - FlexSim Brasil |
#7
|
|||
|
|||
Problems with shadows
As you can see in the file attached, shadows might not working properly like in the version beta. Anything that I´m missing?
Thanks,
__________________
Michael Machado - FlexSim Brasil |
#8
|
||||
|
||||
Make sure that shadows are turned on in your global preferences. Apply the global preferences window.
The 7.3 beta wasn't sharing its global preferences with 7.1. Version 7.3 is sharing global preferences with version 7.1. The shadows aren't appearing because your global preferences are from version 7.1 instead of the new 7.3 defaults. Applying the global preferences window will reset your shadow settings so that they appear correctly. |
The Following 2 Users Say Thank You to Phil BoBo For This Useful Post: | ||
Sebastian Hemmann (08-07-2014) |
#9
|
|||
|
|||
Hi
As there is no button or icon to statfit, just wonder if there is any instruction info in the using of statfit in the manual? Regards David
__________________
Advent2 Labs David |
#10
|
||||
|
||||
There is no button from within FlexSim to open Stat::Fit. For version 7.3, we have implemented the distributions that the Stat::Fit software outputs so that you can use any results from Stat::Fit in FlexSim.
As I said before: If you have questions regarding the removal of ExpertFit, contact support using the webpage at www.flexsim.com/support Support will answer your particular concerns directly, depending on your individual needs. |
#12
|
||||
|
||||
Stat::Fit is not bundled with FlexSim 7.3. We have implemented the distributions from Stat::Fit so that people that use Stat::Fit can use its results in FlexSim.
FlexSim 7.3 does not uninstall FlexSim 7.1. You can still use your existing ExpertFit software that was installed with FlexSim 7.1. Again: If you have questions regarding the removal of ExpertFit, contact support using the webpage at www.flexsim.com/support and they will answer your particular concerns directly. |
The Following User Says Thank You to Phil BoBo For This Useful Post: | ||
Jörg Vogel (08-13-2014) |
#13
|
|||
|
|||
Recently I have installed 7.3 and I found its very slow. I have model of size 18MB, appox. 325 objects and 3D layout.
When I open this model in 7.3 I am not able to navigate. It becomes very very slow and I can not work. Same model if I open it in 7.1 it works very smoothly. I checked global preferences for 7.3 and tried to match with 7.1 but no improvement. |
#14
|
||||
|
||||
Turn off shadows on the Graphics tab of the global preferences.
|
The Following 3 Users Say Thank You to Phil BoBo For This Useful Post: | ||
shivrash (08-29-2014) |