Problems with "run"

Hi all... i was working in a model, but when I give a click on the "run" button, the runtime doesn't starts, but I still can interact with objects and views. That was before i made some modifications on "user events" (i take out that but nothing then).

Can any one tellme what kind of causes produce that??

Thanks...

Nob.

Is your slidebar all the way to the left? (so runspeed is 0)?

No it doesn't. It seems to be a problem with a task secuence with a transporter. I start again the model.

Sounds like an infinite loop. Maybe you created a User Event with First Event Time of 0 and Repeat Event Time of 0. I just tried it and you can still interact with the model.

You can also create infinite loops using a Source repeating a Schedule with only 1 row, or using an OnMessage trigger that messages itself in 0 time without changing conditions in the code. I'm sure there are other ways...

If you are stuck in a bad loop (can't push Reset), Ctrl+Break might be able to get you out of it.

I think is not a infinite loop cause i'm not even a little stuck after run the model, and i don't have a source but a User Event with First Event Time without repeating in time 0.

Anyway i have already solved. I started modifying model from the last "good" save and make the sames steps that i made in the "crush-no running" model, and finally could see that i deleted and object linked to user event in time 0 and linked to a task executer, i did it again, and i got a message referring to an invalid task secuence, and then running time doesn't start.

I avoided it and there was no problem no more.

Thanks for information Kris, equally.