HC Routing to two areas

I'm trying to model a branch into two individual exam rooms (each having 2 exclusive use of 2 changing rooms). after registration the patient is sent to an empty changing room and from there, should go to the examination room associated with that changing room.

Model here

This works fine using the NextArea in Advanced Functions. - BUT - after passing the branching activity (GoToChange) each patient is associated with the duplicate activities from each path.




I altered the predecessor activites but failed to fix it.

Also, after the patient exits the model, his red path-link is still active - see screen dump at exit above.

Any thought on what's wrong - or am I going about it in the wrong way anyway?

Thanks, Kenny

Hello,

Not sure what was wrong with your model, but i make it work with another aproach, instead of using the Area Chooser on the advanced function, i used the Activity Chooser on the previous activity, and added a Patient travel unnatended activity for the second branch. also the gotodressingroom activities are their own predecessor to make it work.

Looking at the model the duplicated activities i think happens because they have the same predecessor activity, this is why when branching i always use the next activity chooser. The next area chooser i only use it when the same activities down the track can be done on more than one area.

regards

Pablo Concha E.

pd.- attached is the edited model.

Thanks Pablo - that worked well. I did try the Next Activity but it was in the wrong place.

I also managed to run the experimenter - substituting XX for one of the "Next Activities"

Thanks, Kenny